Beacon-Morris “BRT” Residential Garage Heater Review

The Beacon-Morris “BRT” Residential Garage Heater is one of the most efficient options available, but are you confused about whether it is the right choice? 

We will help you get the answer to this question with our comprehensive review of it. Known to be extremely versatile, this is a gas-fired heater. It uses the latest technologies to heat air and is equipped with a distinct single-orifice burner system. And that’s just the beginning of its benefits. 

Although there are some drawbacks to consider, we found that the brilliant list of features makes up for them. So, it is time for you to grab a cup of coffee and get started with the review. 

Let’s dive in. 

Beacon-Morris “BRT” Residential Garage Heater Review

Why Buy This Product?

To review this unit well, we will discuss the advantages in detail. Read on to know all about it. 

1. Propane And Natural Gas

The product generally runs on natural gas but can run on propane too. We found that both propane and natural gas are easily available and are not very expensive. Also, refilling fuel will not be a very difficult task, and if you have prior experience with it, you can do it very quickly.

The fuel is also a clean-burning product and will be a good choice for the environment. It will not harm the environment like other fuels. Additionally, we found it to be very dependable. Unlike electricity, power cannot go off at any point. Whenever you see the fuel levels depleting, you can immediately fill it up. 

2. Spark Ignition

The item allows immediate spark ignition without the need for a pilot light. It will spark up directly and allow the main flame to ignite. We were very impressed with the immediate heating mechanism and the flame sensor, which helps in making sure that the burner is lit. 

The product also has a built-in thermostat that controls the heat level. It will stop heating when the required temperature has been reached. On the other hand, this system will keep the circuit functioning if the temperature falls below what is required. The heater can also be connected to a wall switch so that you can turn it off when not needed.

3. Heat Exchange

This product features tubular heat processes that deal with both cold and hot fluids. The recuperative heat exchange system uses this fluid to heat up cold air that enters from the back. It warms up when it passes the hot tubes and is then pushed out through the front. These heaters have the best heat-exchangers and ensure that there is a constant flow. 

4. Additional Equipment

Beacon-Morris is well known for products that consumers can trust. We were very happy with the customer service and the assurance from them regarding materials and conversion kits. 

You will easily get new parts if any of the ones in your heater malfunctions. Not only that, but you will also get tools for altitude adjustments, downturn nozzles, and supply voltage equipment. Apart from the above, there are a number of conversion kits that help you adjust the unit and run it the way you prefer. 

5. Safety Features

Any heater is incomplete without a proper safety standard certification as home insurance policies demand it. This certifies that the heaters are safe and will not lead to any sudden fires. 

You will be happy to know that BRT series heaters have residential and commercial garage heater certification. Along with it, this also is ETL certified, and that is the mark of safety in North America. It is accepted by the AHJs and Code Officials and meets the industry requirements and standards in the case of materials used and process of manufacture. 

Also, it is equipped with internal overload protection and has OSHA certified fan guards. You will get flame rollout safety switches that add to the safety measures. We were not afraid to install this in our garage, thanks to all of this. Experts and professionals prefer using this product over other garage heaters for this level of safety. 

6. Sufficient Warranty

Another commendable attribute of this model is that it comes with a good warranty period. You will receive a complete 1-year warranty for all its parts and materials used, while a 10-year warranty is provided on the burner and exchanger.

The customer service needs to be mentioned again for their efficiency and support. In case a part needs to be replaced, all you got to do is call up customer care, and they will take care of the rest. 

7. High Heating Capacity

BTU is the most common unit of measuring heat, and BMH is also widely used in the case of measuring large amounts of heat. 1 BMH is equal to 1000 BTU/hour, and Beacon Morris uses this unit while talking about the specifications. This series of heaters range from 30 BMH to 120 BMH. It will help you determine the heating capacity as well as the size of a unit. 

8. Area Coverage 

We were very happy to see the large area that it could cover. From small to large garages, this one is capable of covering the entire area easily. It can heat up to 4000 square feet if it is running on 120 BMH. On the other hand, if you have a small garage of 800-1000 square feet, you will need the machine to run with 30-60 BMH. 

What Could’ve Been Better? 

Although the model is very powerful, it is bulky and cannot be transferred without the help of professionals. You have to decide the location clearly and then only proceed to install it. If you want to get the product cleaned after intervals, get professional help. You might lose the warranty if any of the parts are damaged due to tampering. 

Also, you will not be able to install it by yourself. The process of installation can be tricky, and you will need to take the help of professionals. It is best to call customer service and ask them to schedule experts from the same company to come and attach it. 

Beacon-Morris BRT Buyer’s Guide

Now that you know about the advantages and disadvantages of using the product let us help you with some factors that need to be kept in mind while purchasing. You need to look at the specifications of a heater as well as the garage that you are going to install it in.

Also, check for the amount of heat and the space required to install it. We will discuss all the factors in detail below. Pay careful attention, and you can have a heater that lasts you for a decade easily. 

1. Insulation Capacity

A heater can be extremely good but might completely fail if the insulation capacity of the space is not good. Measure the size of a garage, keeping in mind the height, and then purchase a heater. This is because the warm air rises, and there is no extra device for air circulation. Hence the air below stays cooler, and if it is not well-insulated or the ceiling is very high, a lot of fuel will be consumed. 

So, get professionals to come to your garage and assess the level of insulation in it. If required, get additional insulation so that it stays warm even during harsh winters. If you do not want to spend a lot of money on it, you can use cheap plastic to cover the doors and windows properly. This will prevent heat loss from these spaces. 

Also, determine the amount of heat that you will require to keep the space warm. Set the heater accordingly, and remember to switch it off when not in use. 

2. Safety Measures

Garage heaters may need to be left unattended often. That means you got to make a very safe choice. Ensure that there is a tip-over switch that will turn off the machine as soon as space is heated up. This will prevent accidental fire and other accidents. Also, it should have a cool-touch housing so that you can operate the switch without getting a heat shock. 

Also, ensure that none of the vents are blocked. This is valid in the case of exhausts and other openings present on the body too. There should be space for your heater to cool down. 

Another point to remember is to switch the device off immediately after use. This will save fuel as well as ensure that the machine is not harmed due to excess heating. Now most devices will switch off by itself, but accidents can happen when you are not expecting it at all. Unplug it during cleaning and maintenance, too, to prevent any fatal accidents. 

3. Option To Mount

Heaters are supposed to be versatile and should come with an option to mount on the wall. If you do not have ample garage space, mounting it on the wall will help you save space. It will also let the heat reach you quickly, and with good insulation, you would not have to consume too much energy. 

But many devices do not have the option to mount, or they might be too heavy for the wall to support their weight. Hence, check for this option carefully before purchasing. 

4. Fuel Type

What powers your garage heater? While some options work on electricity, others work with natural gas and propane. These are not very harmful to the environment when compared to other fuels and are a good choice to make. Gas-powered devices will not need to be connected to a power outlet and will not stop running in case of a power cut. 

Also, you do not need to be concerned about the size of the power cord and working during thunderstorms with gas-powered ones. The heater can be switched on regardless of the weather outside. Pair it with proper insulation, and you are good to go.

Verdict

If you are looking for a reliable product that will meet all the safety standards and work brilliantly, the Beacon-Morris BRT Residential Garage Heater is an excellent choice to make. It can be customized to work according to your preferences and will ensure reliable performance. 

Although the product should fit into your budget and will provide value for money, you might have to pay extra for installation and cleaning. But that is a small price to pay for a dependable and safe option. 

We hope you have a hassle-free experience with this one. If you have any further queries, let us know in the comment section below.

Until next time!

The post Beacon-Morris “BRT” Residential Garage Heater Review appeared first on Homesthetics - Inspiring ideas for your home..